24/7 Emergency Line
Schedule Inspection
INSPECT
IICRC CMI Certified — Lewisville, TX

Mold Inspection in Lewisville, TX —
RH Logging, Thermal Mapping & Defensible Reports

Persistent musty odor with no visible mold in your Lewisville property isn't a mystery — it's a diagnostic challenge. Our inspectors use RH data logging over time (not a single-point reading), thermal imaging to map moisture zones, and borescope camera access to investigate without demolition.

CMI
IICRC Credential
RH Log
Time-Series Data
24–48hr
Lab Turnaround
Licensed Mold Inspection service in Lewisville, TX - Cheap Mold Removal
📷FLIR Thermal Imaging
📈RH Data Logger
📋Accredited Lab Results
🏫IICRC CMI Certified
$Flat-Rate Inspection Fee
01
Why Choose Us — Lewisville, TX

Four Standards Our Lewisville Inspectors Hold

IICRC CMI certification, calibrated instruments, accredited lab, written report. Not a flashlight walkthrough.

RH Data Logging, Not Single-Point Readings
RH data logger deployment for time-series moisture data when single-point readings would be misleading. Standard practice on chronic-moisture assessments in Lewisville, TX.
IICRC CMI Credential — Not Just 'Certified'
IICRC Certified Mold Inspector (CMI) is a specific credential with defined training, examination, and experience requirements — different from general contractor 'certifications' that are marketing terms rather than credential standards. Our Lewisville inspectors hold individual IICRC CMI credentials, documented and verifiable, not a company-level credential applied to uncredentialed staff.
Written Report Matched to Your Specific Use Case
Report format matched to the purpose: pre-purchase, post-remediation clearance, insurance claim, health complaint investigation. Each use case has different required elements.
Sampling Protocol That Avoids Sampling Bias
Sampling bias — placing air cassettes only in areas that look problematic — produces elevated counts that confirm suspicion without establishing context. Our Lewisville, TX inspectors use outdoor comparative samples and multiple indoor samples at areas of concern and unaffected areas — giving the indoor-outdoor and affected-unaffected comparisons that make results meaningful.
02
Inspection Services — Lewisville, TX

What Our Lewisville Inspectors Provide

Every inspection type below uses the same calibrated equipment and accredited lab — the report format and sampling protocol are adjusted to the use case.

Pre-Purchase
🏠
Pre-Purchase Buyer Mold Inspection
Thermal sweep, moisture mapping, RH logging, and air sampling. Written report formatted for real estate transaction use — not a verbal summary.
Thermal Sweep
RH Logger
Lab Data
Clearance
✅
Post-Remediation Clearance Mold Inspection
Treated zone and adjacent area sampling simultaneously. Containment confirmation plus completion confirmation — both documented.
Zone + Adjacent
Containment Check
IH Supervised
Complaint
💊
Health Complaint Investigation
Species-level viable culture sampling plus spore trap for health-complaint investigations. Written report formatted for sharing with treating physicians.
Viable Culture
Species ID
Physician Format
Landlord
🏛
Landlord & Property Manager Inspection
Formatted for property management records and legal defensibility. Inspector credentials, equipment records, lab chain of custody included.
Legal Format
COC Documented
Credential Listed
Commercial
🏢
Commercial Property Mold Inspection
Commercial Mold Inspection in Lewisville, TX covers multiple zones, HVAC system assessment, and per-zone air sample documentation. For multi-tenant buildings, per-unit sampling is conducted when tenant complaints are the trigger. We coordinate report delivery with property managers and legal teams and can produce individual tenant-facing clearance summaries alongside the full technical report.
Per-Zone Sampling
Tenant Summaries
HVAC Assessment
Symptom
📈
RH & Moisture Investigation
RH logger deployment plus thermal sweep plus borescope. Time-series moisture data locates sources that single-point readings miss.
24-48hr RH Log
Thermal Sweep
Borescope Access
Professional Mold Inspection technician working in Lewisville, TX
03
Process — Lewisville, TX

Your Lewisville, TX Mold Inspection — Step by Step

1
Step 01
Call to Book
Call +1-844-578-1604. We confirm the specific use case — pre-purchase, clearance, health complaint, landlord — and schedule accordingly. Same-day and next-day appointments available in most of Lewisville, TX.
2
Step 02
On-Site Instrument Survey
Full instrument survey: thermal camera, moisture meters, RH logger. All readings and photos documented during the site visit.
3
Step 03
Sampling & Lab Submission
Sampling under COC, same-day lab shipment. Non-viable results in 24–48 hours; viable culture 5–7 business days.
4
Step 04
Written Report Delivered
Written report with all data, formatted for your use — real estate, insurance, health complaint, legal. Ready to share without reformatting.
24/7 Emergency Mold Inspection experts in Lewisville, TX
04
Client Reviews — Lewisville, TX

Real Inspection Reviews From Lewisville Properties

★★★★★
Pre-purchase inspection for a Lewisville, TX property that looked clean. Cheap Mold Removal's thermal sweep found significant moisture behind the master bedroom exterior wall — completely invisible to visual inspection or a general home inspector. Lab results showed elevated counts in that zone. We used the written report to require investigation before closing. Found a failed window flashing that had been leaking into the wall assembly for years.
Catherine O.
Lewisville homebuyer
★★★★★
Post-remediation clearance inspection after a contractor claimed our Lewisville, TX commercial property was 'completely cleared.' Cheap Mold Removal's clearance protocol includes both treated zone and adjacent area sampling — and found elevated counts in the adjacent hallway, confirming the removal wasn't properly contained. That written report gave us the documentation to require the contractor to complete the work properly. Without the independent clearance inspection, we'd have signed off on incomplete work.
Robert A.
Facilities manager, Lewisville, TX
★★★★★
Seller-side inspection before listing our Lewisville, TX home. Cheap Mold Removal's clean inspection report — with the IICRC CMI credential on file and accredited lab data — was exactly what our buyer's agent asked for. The report format made it easy for the buyer's attorney to confirm the findings were from a credentialed inspector, not just a contractor.
Lynn S.
Landlord, Lewisville, TX
05
FAQ — Mold Inspection in Lewisville, TX

Mold Inspection Questions for Lewisville, TX Properties

IICRC Certified Mold Inspector (CMI) is a specific credential from the Institute of Inspection, Cleaning and Restoration Certification that requires documented training hours, passing a written examination, and ongoing continuing education. It's a verifiable individual credential — not a company-level certification that a business displays while sending uncredentialed staff to conduct inspections. In Lewisville, TX real estate and legal contexts, having the inspector's individual credential on the report matters because it gives the report a named, verifiable human author who can be contacted for testimony or clarification.
Sampling bias in mold inspection occurs when air cassettes are placed only in areas that appear problematic, without outdoor comparative samples or samples from unaffected areas of the property. Without the outdoor comparison, you can't determine whether elevated indoor counts are actually elevated relative to the outdoor environment. Without samples from unaffected areas, you can't confirm that the problem is localized rather than building-wide. Our Lewisville, TX inspection protocol always includes outdoor comparative sampling and multiple indoor locations — including areas that appear unaffected — to produce results that mean something in context.
Spore trap (non-viable) sampling identifies mold genera under microscopy and quantifies spore concentrations — fast (24–48 hours), sufficient for most routine Lewisville, TX property inspections. Viable culture plates capture only live, culturable spores and grow them for species-level identification — takes 5–7 days but provides species confirmation. Viable culture is warranted when: (1) species-level confirmation is needed for health-complaint investigations; (2) insurance or legal use requires exact species documentation; or (3) Stachybotrys chartarum is specifically suspected and genus-level data from a spore trap isn't sufficient to confirm or rule out.
60–90 minutes on site, same-day lab shipment, 24–48 hours for spore trap results. Complete written report within 3–5 business days of the inspection for standard Lewisville, TX residential properties. Viable culture adds 5–7 business days for lab processing.
Report format is matched to use case at booking. Real estate, insurance, health complaint, legal — each format includes the specific elements that make the report usable for that purpose without additional translation or reformatting.

Certified Mold Inspection Throughout TX

Our Lewisville, TX inspection team covers Lewisville and the broader area. Call to confirm scheduling availability and discuss your specific inspection need.

Zip codes: 75067 75065 75056 75057 75077 75029

Call +1-844-578-1604 — Free Estimate

Need a Certified Mold Inspection in Lewisville, TX?

Certified inspector. Calibrated instruments. Accredited lab. Written report. Call to schedule in Lewisville.

📞 Call +1-844-578-1604 Now

Our Services in Lewisville, TX

🟢 Techs On Duty in Lewisville, TX Call +1-844-578-1604